Suitable for: Creality CR-10 series, MakerBot Replicator 2, CraftBot series
The PrimaCreator Ruby nozzle is the most recent addition to our assortment of PrimaCreator Nozzles.
Why use a Ruby Nozzle?
- All filaments, one nozzle.
- Very durable.
- Ideal for abrasive filaments such as carbon, metal and wood.
- Perfect diameter without jagged edges equals better print quality.
This ruby nozzle is suitable for almost all types of nozzle killer filament ”.
These nozzles are made of the same high quality brass (brass) as the standard brass nozzles from PrimaCreator. To this added is a ruby gemstone at the tip of the nozzle. This changes the common brass nozzle into a nozzle that is next to the standard filaments such as PLA, ABS and PETG can also print the more abrasive materials such as carbon, wood and metal filled filaments.
The standard brass (brass) nozzle is widely used because of the superior heat conductivity. Brass nozzles also have their drawback. If you want to print with abrasive materials such as carbon or wood pla, the brass nozzle will wear out very quickly. A widely used alternative to this is the hardened steel nozzle. This will wear out less quickly but is less suitable for daily use, because the heat conduction is less optimal than with a brass nozzle. The most obvious solution is of course a nozzle that offers the best of both worlds. The nozzle that does that is the ruby Nozzle.
Finally one nozzle for all your filaments.
The ruby nozzles from PrimaCreator are made from it finest high quality brass with a true ruby red tip. They are completed in a state-of-the-art factory. All nozzle are manufactured to a tolerance of less than ± 0.01 mm. This means that your filament will be very smooth and bright surface during extruding, which of course results in better print.
For best results and optimum print quality, recommend we strongly recommend that you realign your build plate after making the switch on a new nozzle. Note that a Prima Creator nozzle may be compatible is with your printer, but that the distance between nozzle and build plate should be adjusted.
Making a Prima Creator nozzle starts with a selected high quality material. When the material is the factory , there is first an optical inspection of the material for each batch nozzles will be used. Than it's time to clamp the material, in other words, put it in one long rod. In our process this is done only once, in many other (cheaper) cases, this process must be several times repeated, often up to 3-4 times and yet you don't get the same results.
After this process, the material passes through an ultrasound cleaning bath and is then cleaned again and protected against oxidation of the surface.
The nozzle now takes shape with millimeter precision, the tolerance is less than ± 0.01mm.
Removing sharp edges from the nozzles is one thing very important step as this is a big part of the result. If there too many sharp edges left on the nozzle will make the nozzle more susceptible are for constipation. So it is essential that the nozzle is very smooth and clean before it is used. A number of nozzles are selected in each batch and cut in half to ensure it meets all specifications satisfied and that the surface is in perfect condition.
The nozzles are then used for the last time checked and individually packaged in a protective box - ready to ship to you to be shipped.
The ruby nozzle from PrimaCreator is the perfect choice for people who only want the best and at a great price!
Veilig betalen kan met
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.