Arnite® ID 3040 combines high temperature resistance, dimensional stability and excellent strength with excellent processing properties. It is one of the few pure PET filaments available today. This filament is extremely suitable for producing white goods connections and automotive sensors.
Arnite® ID 3040 has good adhesion between the layer with a nice surface quality. The printed parts can easily coated or painted. The part is also resistant to weather and moisture. Arnite® ID 3040 not only improves your production performance. But is also kind to our planet, as it is easy to recycle.
- Lighting frames.
- Windshield wipers.
- White goods connectors.
- Fog lamp housings.
Global printing guidelines.
- Experience level: Intermidiate.
- Printing surface: PEI sheet
- Enclosed printer needed: Preferred
- Heated Build Chamber: Preferred
Retention of hygroscopic filament.
Arnite® ID 3040 Supplied in an airtight, moisture resistant packaging with a moisture content <0.05 w%.
When the filament is wet it must be dried. Using a convection oven on one temperature of 80 ° C for at least 4 hours is recommended. When you get it filament after printing, it is recommended to seal the bag and use silica gel to the bag to keep this filament as dry as possible. To To prevent moisture absorption, the supplied packaging must be closed and be kept undamaged. For the same reason, it must be partially used bags are sealed before being stored again. Leave it material stored elsewhere adapt to the temperature in the processing space while the bag remains closed. To absorb moisture condensation To avoid filaments, insert cold filaments down to ambient temperature the workplace while keeping the packaging closed.
DSM Plastics Finder
For more technical information and guidelines you can use the DSM Plastics Finder see.
You can pay securely with
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.