BondTech Raise3D DualDirect upgrade

Raise3DSKU:81116

Prijs:
€220

Verzendkosten berekend bij het afrekenen

Voorraad:
Niet op Voorraad: Klik de knop hieronder
  • Op werkdagen voor 16:00 besteld, zelfde dag verzonden
  • Vanaf €55 geen verzendkosten
  • Binnen 14 dagen retourneren

Vragen over dit product? Neem contact op!

Tel: 085 047 1414 of stuur een mail.

Zakelijke bestelling? Klik dan hier

Omschrijving

Bondtech upgrade extruder for RAISE3D DualDirect with dual nozzles. This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. The housing parts are professionally SLS printed in polyamide for maximum strength and precision. Please Note! On early printers an adapter cable is needed in order to connect the factory cable to the new motor. You can determine if your printer has legacy motors with an easy visual check. Motors that require an adapter will have a silver appearance (unpainted aluminum finish) on the front and rear side of the motor.  If the motors on your printer have a black front and rear motor endplate then you will not need this adapter.


This extruder upgrade kit for the Raise3D N1/N2/N2+ printer will replace the original feeder placed on the printhead.

It allows for a more reliable printing with all sorts of filaments, both stiff and flexibles and the DualDrive system ensures that the extruder never looses grip of the filament so grinding, slipping is a thing of the past.

Original extruder setup on Raise3D is 890g for dual setup, this new upgrade is 425g with the included motors and it allows for faster printing without surface issues due to vibration during accelerations/deaccelerations.

The kit comes with it owns lightweight pancake motors.

The extruder is equipped with two push-fit connectors for 4 mm guide tube that will let you connect the existing guide tubes to the extruder. Tubes are not included.

Installs in about half an hour with standard tools available.

This upgrade fits both the Revision 1 (casted) and Revision 2(cnc-milled) version of the printhead.

Full installation guide available at the tab installation guide.

Installation is done in about 20 minutes.

Plug & Play solution, no need to cut and solder wires.

E-step value: 415

IMPORTANT!!
It has come to our knowledge that if the ribbon cable to the break-out board gets unplugged when the printer is turned on, thermal runway might happen, make sure that the ribbon cable is securly held in place with hotmelt or a zip tie.


Kit contains everything you need to rebuild your printer.

1 x DualDirect extruder with motors
2 x 0.7 m PTFE 4/2 mm guide tube
1 x Breakout board cover

Veilig betalen kan met

Apple Pay Google Pay iDEAL Maestro Mastercard Union Pay Visa

Uw betalingsgegevens worden veilig verwerkt. We slaan geen bankgegevens op en hebben geen toegang tot uw bankgegevens.

You may also like

Recently viewed