Description
StoneFil is an on PLA based 3D printer filament. It exists from the EasyFil PLA from FormFutura that is gravimetrically filled with 50% powdery stone. Due to this high percentage of powdery stone, the printed objects almost real on stone. The filament has a density that is 37% is higher than with ordinary PLA. StoneFil is an easy to print 3D printer filament and gives a matte, stone-like result.
Unique properties
- Easy to to print
- 50% powdery stone
- 37% swords then just PLA
- Matte and rough stony result
- Every print has a unique stone-colored pattern.
Pay attention!
Due to the high concentration of powder stone “scrapes” the filament through the nozzle. If you have a brass (brass) nozzle used, it will wear out very quickly. That's why we recommend using a nozzle made of stainless steel or other hardened metal.
Global print guidelines
- Nozzle size: ≥ 0.4mm
- Layer height: ≥ 0.12mm
- Flow rate: ± 110%
- Print temp: ± 200 - 240 ° C
- Print speed: High / Medium
- Retraction: Yes ± 5mm
- Heat bed: ± 0 - 60 ° C
- Fan speed: 50-100%
- Experience level: Beginner
You can pay securely with
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.