DSM Novamid® ID 1030 (PA6-66) - Green

With this Novamid® ID 1030 nylon filament you can 3D parts prints that are almost indistinguishable from those produced with injection molding.

This nylon filament is a pure polyamide 6/66 and was originally made developed for demanding special applications. Which were often exposed harsh conditions and high temperatures (up to 125 ° C). Novamid® ID 1030 filament is relatively easy to 3D print and offers a unique combination of properties. Such as excellent rigidity and flexibility. The optimized crystallization profile improves fusion, leaving parts with excellent interlayer strength and high surface quality are possible.

Novamid® ID1030 is very suitable for sustainable applications requiring good mechanical properties.

Examples of applications.

• Electronics.

• Transport.

• Sport & lifestyle.

Global printing guidelines.

• Nozzle size: ≥ 0.25mm

• Layer height: ≥ 0.1mm

• Flow rate: ± 100%

• Print temp: ± 220 - 245 ° C

• Print speed: Medium / High

• Retraction: Depends on printer and filament diameter.

• Heat bed: ± 60-120 ° C

• Fan speed: 0%

• Experience level: Intermediate.

• Printing surface: PEI sheet

• Enclosed printer needed: Yes

• Heated Build Chamber: Preferred

Storage advice.

Novamid® ID1030 is supplied in an airtight, moisture resistant packaging with a moisture content <0.05 w%.

To prevent moisture absorption, the supplied packaging must kept closed and undamaged. The same reason must be partially used bags are sealed before being stored again. Let the material stored elsewhere will adapt to the temperature in the processing space while the bag remains closed. To absorb moisture condensation To avoid filaments, insert cold filaments down to ambient temperature the workplace while keeping the packaging closed.

DSM Plastics Finder

For more technical information and guidelines, please visit the DSMPlastics Finder see.