Raise3D Hyper Speed Upgrade Kit (Pro3 Series Only)

Raise3D Hyper Speed ​​Upgrade Kit for Raise3D Pro3 Series

The Hyper Speed ​​Upgrade Kit (for Pro3 series only) is the first product of Raise3D's Hyper FFF technology. The upgrade increases the print speed of a Pro3 Series 3D printer from an average of 50-80mm/s to 200-350mm/s, and increases acceleration from 1,000mm/s2 to 10,000mm/s2, with no loss of accuracy or quality of the part.

A Raise3D Pro3 or Pro3 Plus equipped with a Hyper Speed ​​Upgrade can print 600-1,000 grams of filament within 24 hours. This means that 3D Print orders up to 400 grams are ready within 12 hours!!

Contents of the Hyper Speed ​​Upgrade Kit:

• An upgrade letter
• Software Upgrades
• Two Hyper Speed ​​Hot Ends 0.4mm (Pro3 series only)
• A Hyper Speed ​​Auto Calibrator (Pro3 series only)
• A spool of Hyper Speed ​​PLA filament (color: white. Specifications: 1kg/1.75mm)
• A spool of Hyper Speed ​​ABS filament (color: natural. Specifications: 1kg/1.75mm)

Important to know:

Please note that for Hyper Speed ​​to work correctly, the Hyper Speed ​​Hot Ends 0.4mm (Pro3 Series), the Hyper Speed ​​Auto Calibrator (Pro3 Series), and the Hyper Speed ​​Filaments must be be installed on a Pro3 series printer that has been activated with Hyper Speed ​​mode. The lack of any of these components could potentially result in 3D printing problems.

A Hyper Speed ​​Upgrade kit can only be installed once on a single Raise3D Pro3 series printer . If you want to use the Hyper Speed ​​Upgrade on multiple 3D printers, you must purchase an upgrade kit for each machine.

MPN: [S]3.01.1.024.058A01